Installation of heating systems

Lighting, heating, sewer systems, clean water, telephone and television have been the main attributes of any household for many years. Today the point is not in their presence in the household but that the infrastructure that serves the systems should be cost efficient, ecologically friendly and easy to control.

Choosing an optimal heating system

It is quite difficult but easy  

In case we don’t move to a prepared flat in a block house with all conveniences but build or repair our own house then we should understand the importance of properly mounted service lines. One of the key issues to be solved by the owners of a cottage or country house is the installation of the heating facilities. This matter is not easy and requires a complex approach.

Calculation of gas and power supply, surface area, transport costs and storage rooms – all these factors shall be taken into account when choosing the most appropriate heating solution and equipment. It is quite difficult to choose the best option without having a qualified assistance.

 Heating systems. Principles of operation in a country house

The process of choosing equipment for heating is not the most difficult part. In the worst case a bad heating system will be also working but not very efficiently causing discomfort. The more important is a proper and qualified heating assembly by following all the standards. Such a system shall be successfully installed without the necessity of finishing and repairing works. A well mounted system shall be working for a long time providing heat and comfort.

How can all the tasks be solved? There is a tip – contact “Baltic Engineering Systems” specialized company. Assembly of heating systems is one of our activities. Our specialists will help you engineer and install a heating system of any design and complexity. We provide a long-term warranty, that’s why our customers never come up with finishing the projects by themselves.

As mentioned above heating systems operate by the use of various fuels. Each system has advantages but may not be installed in every building. For example, a gas-fired boiler requires gas supply and electric boiler is usually connected to a three-phase line. Combined boilers are generally installed in case of gas or electricity problems. They are driven by different fuels.

The table below shows pluses of various utility products from the point of cost efficiency and environmental compatibility.

When choosing heating systems our specialists consider all your requirements and provide the most economically efficient option.

In the course of heating installation we take into account the following aspects:

1. Security. Heating security shall be provided both by the manufacturer and assembling company. An unprofessional and improper assembly may result in leaking (damage of floors and furniture) and fires.
2. Cost efficiency. A professional engineering and assembly of heating systems may save significantly by means of choosing the proper solution and prices calculations.
3. No defects. The majority of pipe-lines and their joints shall not be pressed again. It means that in case of a defect the expenditures will be significant. Our specialists consider all the details minimizing the defects.

Steps for heating installation:

1. Pipes laying

As a rule, this step is the initial step. Pipes are laid inside the built building and may be laid on the floor or walls. The process requires usually drilling and concrete cutting.

Laying of reinforced plastic pipes:

2. Assembly of boiler

Boiler is generally installed in the utility room although gas-fired models of low capacity may be installed in the kitchen. Gas boilers with the capacity from 60 kW shall be assembled in the boiler rooms equipped according to the regulations. Electric boilers may be assembled in other premises of a cottage or country house.

Assembly of a solid fuel boiler:

3. Assembly of heat insulated floors (if specified)

Heat insulated floors are mounted after the communication installation has been completed but before laying parquet or tiles. They may serve as an independent type of heating, for example, in the bathroom, toilet or corridor or in other rooms.

4. Installation of radiators

Radiators are generally installed when the finishing works have been completed not to damage the plaster works, painting or hanging wallpapers.

5. Start-up procedure

This is the finishing step of installation. Firstly, the system shall be tested on endurance. To do this, water is pumped inside under pressure which is approximately as more as twice than the working pressure. In case the system proved to be waterproof within 24 hours, then the adjusting procedure starts. Upon adjusting an optimum performance the set-up works are completed. Is it worth saving on installation works?

A professional installation of the heating system is rather expensive that’s why some dwellers try to make the procedure by themselves or by means of specialists who ask for cheaper prices but not authorized for such works. Unfortunately, such attempts may lead to serious problems.

“Baltic Engineering Systems” has been working in Saint Petersburg for many years and proved to be not only successful and professional but also as a company providing the service for cheap prices.

Our top-ranked specialists will help you find the engineering solutions for your projects.

Call +7(812)740-47-75 or write to info@bengs.ru.